0
What else can I help you with?
What is the center bore on a 2003 GX470 wheel 106 or 108?
The center bore on a 2003 Lexus GX470 wheel is 106 mm. This measurement refers to the diameter of the hole in the center of the wheel that fits over the vehicle's hub.
What is a Hub center Bore?
The hub center bore is the central hole in a wheel that allows it to fit snugly over the hub of a vehicle's axle. It ensures proper alignment and minimizes vibration when the wheel is mounted. The size of the hub center bore can vary between vehicles and wheel designs, making it crucial for compatibility during wheel installation. A precise fit helps maintain safe handling and performance while driving.
What is the bolt pattern on a suzuki sidekick 1995?
The bolt pattern on a 1995 Suzuki Sidekick is 5x139.7 mm (5x5.5 inches). This means there are five bolt holes, and the distance between the centers of two opposing holes is 139.7 mm. Additionally, the wheel's center bore is typically 60.1 mm, and the recommended wheel lug nut size is M12x1.5.
What size is the wheel center bore for a Toyota pickup 1991?
Call any Discount Tire store. They will tell you.
What is the wheel bolt pattern of a 1999 Cadillac Seville sts?
Bolt pattern is 5x115. Center bore is 70.3
What wheels fit suzuki sx4?
The Suzuki SX4 typically uses wheels with a bolt pattern of 5x114.3 mm and a center bore of 56.1 mm. The standard wheel size ranges from 15 to 17 inches in diameter, depending on the model year and trim. It's important to check the specific model and year for compatibility, as offset and width may vary. Always consult the owner's manual or a wheel specialist for the best fit.
what is the piston bore size in a 1987 rm 250?
What is the standard bore size of a 1987 suzuki rm250 1987
Will 16 in wheels fit a car with original 15 inch wheels with same lug pattern?
The bolt pattern is only one part of proper wheel fitment. If you are using wheels from a different model car, you also need to be aware of wheel offset and center bore. You should use wheels of similar width and offset so they don't stick out or sit too far in which can cause clearance issues. The center bore needs to be large enough to fit over the hubs on your car. Most cars come with hub-centric wheels to fit exactly on the hub flange, if you use a wheel with larger bore you can get hub rings to center the wheel. On some vehicles you may get excessive vibration by using wheels without the hub rings or the proper hub bore.
Will 2005 mustang wheels fit a 1970 mustang?
They may fit with spacers, but they will not be a direct swap. You also have to consider the center bore of the wheel - they may be different.
What is the wheel bolt pattern for a 2007 vw jetta?
Bolt Pattern : 5x4.41 in / 5x112mm Stud Size : 14mm x 1.5b Center Bore: 57.10 / 2.25 in
What is piston size on a 2006 suzuki eiger 400?
82MM is standard bore and 71.2MM is the Stroke
What is the bore and stroke size for a suzuki 92 ts185?
Standard bore is 64mm and stroke is 57mm giving a capacity if 183.3cc. Maximum oversize piston from Suzuki is 65mm but aftermarket piston are up to 66mm, giving a displacement of 195cc.More help and information at suzukits.comCheersNigel in NZ
