0
In Des Moines,IA the usual plumber's fee appears to be about $1,000.00 and for good measure, if there's concrete repair involved, add about another $600.00.
Just incidentaly, repair doesn't appear to be part of the vocabulary... Replace seems to be the operative word.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How much does it cost to replace a curb stop box?
On average it can cost a wopping $1-10 dollars
Curb box, curb-stop box, curb-valve box, Buffalo box?
The "curb stop" is the valve that is on the service from the main into your house. i.e. The 8" main in the street has a saddle tap with your 3/4" service line on it. Within 8 ft of the connection between your service and the main is your curb stop. The curb stop is a valve buried underground. In order to open/close the valve a curb box is placed over the valve. It is essentially a metal tube that lets you open and close the curb stop.
Where is a curb stop box located?
Right near the curb
What is a curb stop box?
A curb stop is the valve which the city or municipality has installed to turn the water service off and on to a building . Some private systems also have curb stops installed if there are multiple buildings on a common well or water service a curb stop box refers to the enclosure which houses the actual valve most curb stop boxes are not boxes at all but cast iron housings with a pipe that extends to the ground level with a removable cover the valve is accessed with a special wrench which is slid down the pipe and turns the valve off and on.
What is a curb stop?
A curb stop is the valve which the city or municipality has installed to turn the water service off and on to a building . Some private systems also have curb stops installed if there are multiple buildings on a common well or water service a curb stop box refers to the enclosure which houses the actual valve most curb stop boxes are not boxes at all but cast iron housings with a pipe that extends to the ground level with a removable cover the valve is accessed with a special wrench which is slid down the pipe and turns the valve off and on.
How do you repair or replace the glove box in a 1997 Mitsubishi Galant?
You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00
What is a corporation stop use for?
A corporation stop is a cock (stopcock) controlling the flow of water or gas from a main to an individual customer. It is also called corporation cock. It is located where the service lateral is tapped into the main, so it is usually not accessible without digging up the street. A curb stop is also a cock controlling the flow of water or gas from a main to an individual customer, but it is accessible in a valve box or valve can near the curb line, or inside the meter box.
How do you repair leaking power steering box on a 1991 Toyota 4Runner 4X4?
I used Lucas stop leak not a fix but it does work....
Who would specialize in the cleaning and repair of an old music box?
Never pay anyone to repair your music box.The cost of repairs will always exceed the value of your antique music box.There are only a handful of people who do music box repair for a living. They are all very good at what they do, and after they are done with your box it will truly sing more beautifully than Caruso. If your box is of great sentimental value, or is of such inestimable value that it is worth restoring, then you should strongly consider their services.
How do you repair a 1997 Dodge Neon?
Get a repair manual and a box of tools, troubleshoot the problem and follow the directions to repair it.
What is the curb weight of a 1968 ranchero?
The rated curb weight of the 1968 Ford Ranchero was 3,451 pounds. The Ranchero was on a automobile frame with a pickup like box in the rear.
How can you get a box for Xbox to send a broken 360 to ms for repair?
any box will do
