answersLogoWhite

0

Tighten in a criss cross pattern to 70 lb/ft of torque. Work slowly tightening a small amount at a time until you reach 70 pounds.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What is the torque specs for head bolts on a Chevy 292 straight 6?

Torque for 292 head bolts is 95 ft lbs


How many cc's is a Chevy 292 inline 6 cylinder head?

What is the difference of a 1968 292 Chevy engine and a 1982 292 engine?


Oil in coolant 292 Chevy?

Bad head gasket?


Is the transmission bolt pattern the same on a 292 six cylinder as chev v8 motors?

Yes.


Will a Chevy 292 inline six motor bolt up to a Chevy turbo 400 transmission?

yes


Will the head off a 292 Chevy 6 cylinder fit on a 235 Chevy engine?

no the inside of the head will be a different size


How much does a 292 6cylinder head weigh?

Probably around 75-100 lbs., I am assuming its a cast iron head?


What can cause little or no oil pressure to rocker arms when motor reads 40 lbs at idle?

What engine is it? In the old Ford 292 series it was a common problem to have the camshaft bearing "turn", blocking the oil line. The Chev inline 6 used a hollow head bolt that had to be in a specific position to allow pressurized oil to the head. If some other head bolt was put in that position there would be no oil pressure to the rockers. Check to see the routing of the oil pressure line to the head then backtrack to the most vulnerable position.


What is 292 as simplified fraction?

It is 292/1.It is 292/1.It is 292/1.It is 292/1.


What is 20 percent of 292?

20% of 292= 20% * 292= 0.2 * 292= 58.4


What is 30 percent of 292?

30% of 292= 30% * 292= 0.3 * 292= 87.6


Will the head off a 292 Chevy 6 cylinder fit on a Chevy 250 engine?

No, the cylinder head from a 292 Chevy six-cylinder engine will not fit on a Chevy 250 engine. Although both are part of the Chevrolet inline-six family, they have different head designs and mounting configurations. The 292 has a larger bore and different port sizes, making them incompatible for direct swapping. If you’re considering modifications, it’s essential to consult specific engine compatibility resources or experts.