0
Add your answer:
Earn +20 pts
What was the name of the furnace invented by Pierre Martin and Werner Siemens?
The open hearth furnace.
When was the Open Hearth Furnace invented?
In 1865, the French engineer Pierre-Émile Martin took out a license from Siemens and first applied his furnace for making steel. Their process was known as the Siemens-Martin process, and the furnace as an "open-hearth" furnace.
How do you open furnace zephyrus train in aqw?
When you are at the furnace on the train at the very front of the train, you click on the furnace. Once you click on the furnace, it will pop up a window asking for a code. Ignore the code as there is no code to open it up. Instead, remove the pin in the door hinge.
Is furnace penitentiary a real place?
No, Furnace is not a real place. the government would never allow it to open.
How do you know whether a furnace damper is open or closed?
There should be a lever somewhere on the duct near the furnace. If it is open, the lever will be parallel to the duct. If the damper is closed, it will be perpendicular to the duct.
Should the return at the bottom of the wall be open or closed when the furnace is on?
Open, that`s where the cold air is.
What reading will you get on your multimeter if furnace thermostat is bad or open?
If the thermostat is open, the ohm reading will be O/L.
How do you place items like a furnace in mine-craft creative mode?
You just open your inventory, select a furnace and put it into your inventory and then place it as usual
Should you open cold air returns?
Yes. They are there to draw the air back into the furnace that blows out of your heat/cooling vents. They help create air circulation and clean the air that is "returned" to the furnace and passes thru the furnace filter.
What is wrong if you turn the thermostat to off but the furnace is still running?
When you say the furnace is still running, I take that to mean the fan and not the actual flame portion of the furnace. If this is correct, you either have a fan relay that is sticking closed or your tstat is bad. == == == == There may be a very slight time delay the the thermostat before turning off the furnace, but if you are sure that you have turned the thermostat off and the fire continues to burn, you have a serious problem. Have it checked out. The gas valve may be sticking in the open position. Regards
What is the difference between a closed combustion furnace and open combustion furnace?
A closed combustion furnace has a sealed combustion chamber, drawing outside air for combustion and expelling combustion gases outside through a dedicated vent, resulting in higher energy efficiency and indoor air quality. An open combustion furnace draws air from inside the home for combustion and expels gases through a chimney, potentially leading to energy loss and indoor air quality issues.
Where do i add sae 10 non detergent oil to my furnace blower motor?
To add the sae 10 non detergent oil to your furnace blower motor you will have to open the motor section.
