answersLogoWhite

0

Displacement of "350 bored 30 over" seems to refer to an engine specification, likely indicating a 350 cubic inch engine with a bore size of 30 over (30 thousandths of an inch larger than the standard bore). This means the engine's cylinders have been bored out to accommodate larger pistons, increasing the engine's displacement. The exact displacement can be calculated based on the new bore size and the stroke of the engine. However, additional information, such as the stroke length, is needed for a precise calculation.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

What is a Chevy 350 bored 30 over?

355


What is the bore size of a 350 bored 30 over?

A 350 engine typically has a standard bore size of 4.000 inches. When it is "bored 30 over," it means the bore has been increased by 0.030 inches. Therefore, the bore size of a 350 bored 30 over is 4.030 inches.


What is the best transmission to go with a 350 bored over 30?

4L80E


What is a Chevy 350 engine bored 30 over called?

355


What ci is a 350 after it's been bored 30 over?

It is now a 355 CID.


What cubic inch is a sbc 400 bored 30 over with a 350 crank?

377


What is the bore of a 350 Chevy motor that has been bored 30 over?

Its a 355 cubic inch


Did any 1970 350 cast number 3970010 come factory bored 30 over?

No. They ALL came with the standard 4.00" bore from the factory, whether it was a 302, 327, or 350. If it's bored 30 over, it's been rebuilt at least once.


How many horses is in a 350 bored 30 over?

That depends on the components used. It can vary from around 150 to over 1000.


What is the horsepower on a 5.7 350 bored 30 over Chevy engine?

In the mid 300 ish Hp


What size is a 444 cu in engine bored 30 over?

A 444 cubic inch engine bored 30 over has an increased displacement due to the larger bore size. Boring an engine 30 over typically means increasing the bore by 0.030 inches, which can slightly raise the total displacement. To calculate the new displacement, you would need to know the original bore and stroke dimensions, but generally, the increase is minor, around a few cubic inches, leading to a final displacement of approximately 446 to 447 cubic inches.


What is the cubic displacement on a Chevy 454 that is bored out 30?

460.36 cubic inches