alarm goes off
The Bulldog Remote Talking Alarm System has a panic button.
I am not sure if that is a problem for your car or not. Does your car come with a panic button for your alarm? If it does, there is a chance that the doors open in case you hit the panic button and the lights go off to alert people around you. Check with the manufacturer of the alarm.
On your keyless entry remote hold down the panic button and trunk button at the same time till the remote light flashes. Then the "beep beep" of the alarm will sound when locking and unlocking your car.
The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back. The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back. The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back.
To use the Steel-Mate car alarm remote 898, first ensure the alarm system is properly installed in your vehicle. To arm the system, press the lock button on the remote; you'll hear a confirmation sound. To disarm, press the unlock button. Additionally, you can use the panic button for emergency situations or to locate your vehicle.
The purpose of a panic button on car keys is that if someone is breaking into your car and you see them, you can scare them off and attract attention to them by pressing it.
If the horn is honking and the lights are flashing just push the panic button on the remote to stop it
it sets an alarm off on the car. Most people use them in crowded parking lots if they cannot remember where they've parked their car. However I've realized that you have to be a certain distance away for the button to work.
Your remote car has a swich in the inside take it apart and push the button over
Instructions1Enter your car and turn the ignition to the "Run" position.2Press and hold the "Unlock" button on the keyless remote for four seconds, then press and hold the "Panic" button while still holding the "Unlock" button.3Hold both buttons simultaneously for one second then release them.4Wait for a chime to sound from your car then press any button on the remote within 30 seconds.5Wait for another chime and the programming will be complete. You can then turn the ignition key to the "Off" position.
Click the button on the remote
If it's beeping with a horn, most likely PANIC mode on the car remote is on.