0
What else can I help you with?
Why is there a constant beeping on your 2004 c230 radio?
The door to the tape deck is not fully closed.
How do you tell if my 454 is a tall deck block or not?
To determine if your 454 engine is a tall deck block, measure the height of the block from the crankshaft centerline to the top of the deck. A standard deck height for a 454 is about 9.8 inches, while a tall deck block measures approximately 10.2 inches. Additionally, you can check the casting numbers on the block; tall deck blocks typically have specific casting numbers that identify them as such.
What is the deck on a small block Chevy?
The deck is the surface to which you bolt the cylinder heads to.
What is deck (engines)?
The deck of an engine is the area of the block that mates to the cylinder head.
What is the recommended deck block spacing for a stable and secure deck installation?
The recommended deck block spacing for a stable and secure deck installation is typically around 4 to 6 feet apart, depending on the size and weight of the deck. This spacing helps distribute the weight evenly and provides adequate support for the structure.
At what cubic inch does an engine go from a small block to a big block?
The Cubes inches of an engine don't determine if it is a small or big block.. The Physic size, mainly the Deck Height and bore spacing(not volume) determine it.Examples-from ford/chevy, late 1954-1990s(pre modular, LS):Chevy:small block- 9.025" deck ht., 4.4bore spacing, 265-400cibig block-(w and mark motor) 9.8" ht., 4.84 spacing 348-454ciFord:small block-(Y Block)- 9.77 deck ht., 4.38 B. spacing, 239-312ci.low deck block- 8.2" ht., 4.38 B. spacing, 221-302ci.high deck block- 9.5" ht., 4.38 B. spacing, 351ci.Big block-MEL block- 10.48" deck ht., 4.90Bore spacing, 383-462ci.FE block- 10.17" deck ht., 4.90 bore spacing, 332-428ci.385 series block- 10.322 ht., 4.90 bore spacing, 460ci.The largest production big block was the Cadillac 500, 10.81" deck ht and a 5" bore spacing. The largest small block is the LS base Z06 427ci.( 9.24 deck ht., 4.4 bore spacing.)Other big differences are the main journals and the weight of the engine. The weight and limit engine bay space is the main factors for the sudden jump in the size of small blocks. A 427 z06 engine aprox. 400lbs. vs. a 600lbs 427 bigblock.
What is the jaw called in a fully closed position?
occlusion
What does the word deck mean on cars?
Means your trunk isn't closed properly
What is the rod length for a 454 Chevy?
Stock rod length is 6.135 inches, unless it's a tall deck engine, in which case the rods are .400 longer (6.535), tall deck engines were used in big trucks like dump trucks and were usually 427 cu in, if you're talking about a pickup truck or a car it's most likely a short deck version. Deck height on a short deck big block Chevy is 9.800" from the center line of the crankshaft to the deck, deck height on a tall deck big block Chevy is 10.200" from the center line of the crankshaft to the deck.
Can stainless steel fully block magnetism?
No, only a superconducting material can block magnetic field lines.
What is the recommended type of concrete block for securing a 4x4 post in place?
The recommended type of concrete block for securing a 4x4 post in place is a "precast concrete deck block."
Why do cats eat with their eyes closed?
Kittens eat with their eyes closed if they are very young and their eyes have not opened fully yet.
