answersLogoWhite

0

To a car? It overflows and the junk gets everywhere.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Why does your Jeep liberty dip stick register overfull after an oil change?

Too much oil was added.Too much oil was added.


When Sudan 3 solution is added to palm oil what happens?

The oil become colored.


What happens when oil is added to water then frozen?

The oil ends up under the frozen water.


How much oil do we actually ingest with salads?

That would depend on how much oil is in or added to the ingredients and how much you eat.


What can cause an engine to burn too much oil?

added to much oil If you added too much oil that can and will cause engine wear and damage. If you are loosing Oil it is either being burnt, or it is leaking. If it is burning oil it is normally caused by worn piston rings.


What happens when baking soda is added to oil with water?

The baking soda dissolves in the water


What happens if you mix diesel oil and motor oil?

not much. it would change the viscosity of the oil. the diesel oil is much thicker than regular engine oil.


What happens when you mix oil and sterling fluid in your car?

If you don't flush and refill with correct oil/fluid you will shorten the life expectancy of what ever you added the wrong oil to.


What happens when too much oil is added to an engine?

Do not overfill the engine. As the crankshaft spins around, it can whip the oil into foam if the level is too high. This, in turn, can cause a drop in oil pressure and loss of lubrication to critical engine parts. Also, too much oil may cause leaks as the extra oil is forced past seals and gaskets. Drain it out immediately.


What happens when ice is added to canola oil and how does the temperature change?

A black hole is formed and no temperature exists


Why is my engine smoking after i added oil?

Maybe you added too much oil? Overfilling can cause just as many problems as being too low on engine oil. Be sure to check the dipstick after adding oil.


What happens when too much oil is added to a sears front tine tiller can you drain it replace filter and be ok?

If too much oil is added to a Sears front tine tiller, it can lead to excessive pressure in the engine, potentially causing oil to leak from seals or damage internal components. To remedy this, you can drain the excess oil and replace the oil filter if necessary. After addressing the oil level, ensure that the tiller operates normally before using it again. Regular maintenance and monitoring of oil levels can help prevent similar issues in the future.