5t7j gear box
VERY HARD AND VERY EXPENSIVE. I do not recommend. You would spend less money buying a talon or eclipse with the 4g63 engine!
Yes, the same harness was used in the non turbo as well as the turbo, Unless you have the 1.8 liter or the 420a engine.
"Is it possible ot replace Land rover TD5 gearbox with another model landrover gearbox?"
i would swap it with a 4g63 t
scenic II gearbox oil
To replace the gearbox bearings on a Mitsubishi L200, first, ensure the vehicle is safely elevated and secure. Drain the gearbox oil, then remove the gearbox from the vehicle by disconnecting the necessary components like the driveshaft and linkages. Carefully disassemble the gearbox, taking note of the arrangement of parts, and replace the worn bearings with new ones. Reassemble the gearbox, refill with the appropriate oil, and reinstall it in the vehicle, ensuring all connections are secure.
hugyuy fyt t yt
No
Well, some guns I think you can`t, but this is what you SHOULD DO. Go to a local airsoft store, if there is none around, go online. You first need to find out the size of your gearbox/motor and then find one the same size as metal or plastic. :D Hope this helped!
its on the front of gearbox right hand side
Are you talking about taking a 4g63 out and putting a 420a in? If so, i don't understand, why at all, you'd do that.
The synchro cones in the gearbox are worn. Either a strip and replace or a whole gearbox swap is the cure.