15,000
12202789
The Case 580K and 580SK backhoes are both part of Case's construction equipment lineup, but they differ mainly in their engine performance and features. The 580K typically has a less powerful engine and simpler hydraulic systems compared to the 580SK, which offers improved lifting capacity and more advanced hydraulic options. Additionally, the 580SK may have enhanced operator comfort features and updated technology for better efficiency. Overall, the 580SK is considered a more modern and capable machine than the 580K.
It depends on the trans. If it is an earlier 580k then it has a wet brakek and will need specific fluid. Hytran ultra or Case transaxle fluid if newer then gear oil will suffice.
To fill the hydraulic oil in a Case 580K backhoe, locate the hydraulic reservoir, which is typically found near the rear of the machine. Use a high-quality hydraulic oil that meets the manufacturer's specifications, usually AW 32 or ISO 46 hydraulic fluid. Ensure the oil is clean and free of contaminants before filling, and check the dipstick to ensure the correct level after filling. Always refer to the operator's manual for specific oil recommendations and capacities.
power shuttle fluid level is critical in movement of the hoe. If t is low even a little bit it wont move. if level is ok then check the filter in the shuttle pan for debris and being clogged.
The Case backhoe was introduced in the year 1842 in the United States. The fuel consumption for a 580 Case backhoe is one gallon for every twenty horsepower.
A backhoe excavator is one that has a loading bucket on the front and a hoe on the back. Such as a Case 580 backhoe
1959
1959
A case of backhoe parts would consist of many mechanical parts related to a backhoe. Some of these items may be bolts, nuts, shovel, bucket, teeth, and other mechanical or hydrolic parts.
7 ton