0
Add your answer:
Earn +20 pts
Are the rocker arm studs in a 1974 Chevy 350 engine threaded or pressed into the head?
pressed in..
How do i determine the year of my Chevy 350 engine?
what year is my 350 chevy engine K1201KRH
What RPM timing be set at on 350 Chevy 1974 engine?
Rpm needs to be set at 800 - 900 .. that is factory setting.
How much horsepower does a 2001 350 Chevy engine have?
Chevy didn't make a 350 engine in 2001
What is Compression specs for 1974 nova 350?
Compression ratio on a 1974 Chevy 350 in a Nova was 8.5:1.
Where can you get specs or an engine diagram for a Chevy 350 engine?
Atk engines com or 350 Chevy engines com
What is the normal oil pressure on a 1977 Chevy 350 truck engine?
I have a 1974 Chevy truck with the 350 V8 and the engine is in good shape. At idle the oil pressure is 35-40 PSI, at driving speed it goes up to about 50 PSI. Hope this helps.
Can you use a 1986 Trans Am 5 speed tranny with a 1974 Chevy 350 motor What flywheel would you have to use?
You have to use the flywheel for the 1974 engine and the clutch plate for the Trans Am.
What pistons are stock in a 350 Chevy engine 3970010 year is 1974?
Depending on what the engine was used for, most likely dish top pistons. But flat tops ARE possible.
Does a Chevy 1974 Chevy V8 350 need to have vented valve covers?
Whether you do it through the valve covers or elsewhere, yes the engine needs positive crankcase ventilation.
What do you need to swap a 350 Chevy engine into a1988 Chevy pick-up with a 305 Chevy engine?
As long as the 350 is a fuel injected engine / TBI / Throttle Body Injection engine there is NO difference.
Looking for 350 Chevy El Camino engine?
Pretty much any 350 Chevy engine from 1968 to 1987 will work.
