Pipe wrench or channel locks right tight left lose
The oil pump picks up the oil through the oil strainer into the pick up pipe then the oil filter and then goes into the gallery and then to the crankshaft and cylinder head and forms a liquid barrier between the moving metal parts and then the oil drips off the oil feeder back down in a cycle.
worn out oil pump gears,housing,pump cover,oil pick up pipe cracked or seal worn out.
It is connected to the front of the crankshaft, in the area behind the timing belt. There is an oil pick-up in the oil pan at the bottom of the engine, and a tube connects the pick up to the oil pump.
Drill a hole in the rock until you get to the oil. Insert a steel pipe into the hole, and pump the oil up from the bottom of the hole.
5 quarts with the oil filter.
on most engine a oil pump must be removed from the lower side which mean taking the oil pan off. This could be a difficult job because of cross members and exhaust pipe. in some cases you may have to pick the engine up in order to make the necessary clearance.
its eiether by your head pipe or somewhere down along the exhaust
It is inside of the oil pan. You will have to remove the oil pan to get to it.
by the oil filter.
5w30 or 10w30
check the oil dumdass