Need to know what year your truck is and if it's a 4 cylinder or 6 cylinder engine.
Wiki User
∙ 2008-05-01 02:00:39it could be the fuel pressure regulator on the back of your fuel rail or your injectors If it runs fine once you have primed it, I would suspect the ECT (engine coolant temp) sensor is faulty. It should also have 60 t0 66 psi fuel pressure to operated properly.
in a compartment in the glove box.
The fuel shut off valve on a 2000 Chevy S10 pickup is located just outside the gas tank. It is designed to shut fuel off to the fuel pump in the event of an accident to prevent a fire and to kill the engine.
The engine will physically fit, however the wiring and electronics will not hook up, they are quite different, as is the fuel system.
Yes
To clean fuel injectors on a 1997 S10, first disconnect fuel pump from fuel injectors. Disconnect pressure regulator and connect the cleaning kit to the fuel port.
One injector for each cylinder.
Yes, two, there are located in the throttle body.
It is on the fuel rail on the return side. The rail meaning where the fuel injectors attach.
It is under the air cap and behind the fuel injectors.
there in the throttle body the thing under the air cleaner
41 to 47 psi with pump running, engine off. The injectors are operated electrically.
There is one for each cylinder. 4 cylinder has 4, 6 cylinder has 6.
fuel injectors could be clogged
why wont the gas get to the fuel injectors on my chevy s10 If the fuel filter has already been replaced, I would suspect the fuel pump is faulty.
Could be, in need of a tune up, vacuum leaks, leaky fuel injectors,
No there is not, Probley need to replace ingnition module in the distributor if the injectors are not working.