Take the vehicle to your mechanic. The abs (anti-lock brake system) light is on because there is a problem with the abs system. As long as the light is on the abs system is not functioning.
You need to have the abs codes read, repair the cause, and the light will turn itself off.
The abs light is on because there is a problem with the abs system. The light will not go off until the problem is fixed.
There is a problem with the anti-lock brake system. Have the ABS repaired and they will reset the light.
The ABS light is on because there is a problem with the ABS system. Until the problem is fixed the light will remain on. After the problem is fixed the light will reset itself after a short drive.
There is a problem with the ABS. It can be many things and a professional is needed to diagnose the fault.
The ABS light is most likely on because of low voltage, same reason for the battery light to be on. Get your alternator tested.
You may have an ABS sensor going out at one of the wheels.
There are several causes for ABS light to come on the 99 Sunfire. This may be due to worn or leaking master cylinder, contamination of brake fluid, or leaking brake hose.
you have to fix the problem or the light will just come back on until you do.
The light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself afer a short drive.
take the car to auto zone, get them to put their machine on the car to tell you the reason for the check engine light.
It means that the ABS control module has detected a problem in the ABS system. That will be impossible to determine without talking to the module with a scan tool to find out why it turned the light on. The other thing that it means is that you do not have ABS, but you now have conventional brakes. The ABS part of the brakes will not work until the problem is found out and fixed.