Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Possible plugged pump.
A Maytag washer may not spin due to issues with the motor, belt, lid switch, or drive pulley. Check these components to determine the root cause of the problem and address it accordingly. It may be helpful to consult the washer's manual or a professional technician for further assistance.
Check that your washer is level on the floor, as uneven flooring can cause shaking. Make sure the load is balanced inside the drum and not overloaded. Also, check that the shipping bolts have been removed from the machine as they can cause excessive vibration.
either the washer motor has burned out or there is dirt in the washer lines plugging up the washer nozzles.
Lots of things
Gulley Washer.
color loss, washer, always was on cold for color fastness. shrinkage is dryer, you can avoid this by using low heat or no heat tumble dry
No. There is very little mercury in a filling. A white filling will have more shrinkage with time which will cause them to need to be replaced, long before a silver filling. But you should get the tooth fixed right away.
If it is done correctly you should not get a filling. If there is infection in the cavity and it is not removed then there is a good chance you'll have an absess. You may have to take antibiotics the week prior to getting the filling. It just depends on your situation.
yes
Yes, it sure can.
filling the bottle to the top will cause sublimation, not freezing.