0
red
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Where do you put jumper cables on a Chevy suburban battery?
The proper way to use jumper cables to boost a low/dead battery: (1) one end of positive jumper cable to "dead" battery; (2) opposite end of positive jumper cable to "good" battery; (3) one end of negative jumper cable to "good" battery; (4) opposite end of negative jumper cable to GROUND on "dead" vehicle. Remove jumper cables in reverse order.
How do you jump a battery in a Mercedes?
To jump a battery is exactly the same as you would jump start any other cars in the world. 1. Connect the jumper cable positive clamp (Red color) to the positive post of the dead battery. 2. Connect the jumper cable negative clamp (Black color) to the negative post of the dead battery. 3. Connect the other jumper cable positive clamp (Red color) to the positive post of a good battery. 4. Connect the other jumper cable negative clamp (Black color) to the negative post of a good battery. 5. Start your Mercedes. 6. Reverse the 1-4 steps when the car starts successfully. Note: Step 3, and 4 could be a good strong battery, or a battery on a running car. weijen_hsu@yahoo.com
What does the red jumper cable stand for?
somebody said red is positive
How do you hook up jumper cables from one care to another?
To hook up jumper cables, attach one cable from the negative post on one battery to the negative post on the other battery. (These usually are marked "-" and have a blacl cable attached to them.) Attach the other jumper cable from the positive post on one battery to the positive post on the other battery. (These usually are marked "+" and have a red cable attached to them.)
Why does your battery teminal spark when you connect the red jumper cable?
Something is on drawing power from the battery. Always connect the positive cable first and the negative cable last.
Which cable is positive and which is neg?
On a vehicle the red is positive (+) and the black is negative (-). If they are not color coded the cable connected to the starter is positive and the cable connected to the engine or chassis is negative.
How do you jump start S550?
The positive post is on the battery, near the dash/passenger side. The negative jumper cable mounts to a nut/stud on the passenger side strut tower. The stud is tall and brass in color.
How do you connect a car battery cable to a battery not in the car?
It would be essentially the same as connecting a battery in the car, except with longer cables. You would have to use jumper cables to extend the car battery cables. Be sure to follow ALL safety procedures. Do NOT let anyone or anything metal touch anything else except where you make the connections. Do not touch the metal connectors themselves. I assume there is no battery in the car. I will call the battery that is not in the car the "external battery". First connect the positive ("+", usually red) jumper cable to the positive car battery cable, & then the other end of that jumper cable to the positive external battery terminal. Then do the same with the negative ("-", usually black) car battery cable & jumper cable. The last thing you connect should be the far end of the negative jumper cable to the negative terminal of the external battery. When you are ready to disconnect the external battery from these cables, do so in reverse order, starting with disconnecting the negative ("-", usually black) jumper cable from the negative external battery terminal.
What is the proper battery cable connection when jumping two automotive batteries?
Hook up the jumper cables in this order: (1,2,3,4) (1) One end of positive cable to positive post of GOOD battery (2) Opposite end of positive cable to positive post of DEAD/LOW battery of disabled vehicle (3) One end of negative cable to negative post of GOOD battery (4) Opposite end of negative cable to GROUND on disabled vehicle (a good ground is preferred over the negative post, however, the cable can also be hooked to the the battery post). To remove the jumper cables after starting, reverse the order (4,3,2,1)
What color is the positive wires in a 2009 jeep wrangler?
The positive battery cable is red.
What cable is positive on a riding lawn tractor?
Most commonly there is a red cable and a black cable that conect to the battery. The red cable is the positive one. If the cables on your lawn tractor are color-coded, then the cable that connects to the battery post marked with a (+) is the positive.
What color battery cable is negative?
Black is negative and Red is positive.
