open manifold.
There are several causes for high fuel consumption in a diesel engine. These include a difference in the weight of the vehicle, increased usage of air conditioning, and a difference in tire pressure.
Several problems can cause high fuel consumption. An engine that needs a tune up, a slipping transmission or a problem with a sensor giving bad information to the computer can all cause low fuel economy.
High fuel consumption in an Isuzu Wizard diesel engine can be attributed to several factors, including poor engine tuning, clogged fuel filters, or malfunctioning injectors. Additionally, issues like low tire pressure, excessive weight in the vehicle, or driving habits such as rapid acceleration can further exacerbate fuel inefficiency. Regular maintenance and timely servicing can help mitigate these problems and improve fuel economy.
Yes, driving in high gear can lead to excessive fuel consumption, especially if the vehicle is not operating efficiently at that gear. When the engine runs at low RPMs in high gear, it may struggle to provide the necessary power, causing it to work harder and consume more fuel. Additionally, if the vehicle is underloaded or if the speed is too low for the selected gear, it can further exacerbate fuel inefficiency. Proper gear selection is crucial for optimal fuel economy.
Most common cause of unusually high fuel comsumption is a fuel leak. Other possiblities include leaking injectors, faulty O2 sensor, vacuum leak or incorrectly adujsted intake valve.
High fuel consumption on an EFI could be caused by a bad O2 sensor. Another reason for high fuel consumption is a dirty air filter or oil filter that needs to be changed. Electronic Fuel Injection vehicles are also famous for clogged fuel injectors.
Poor driving habits, poor air intake, improperly adjusted fuel pump, excess operating RPMs.
High fuel consumption
Yes but not by much.
Of course there is,fact is when the four wheel gear is engaged,the vehicle aquires a high momentum force and as such,the front and rear diffs are in motion perpecuated by the propeller shaft.Despite the force applied on the vehicle in its locomotion,it necessitates high amount of fuel,as the motorist presses the accelerator cable impactly.Besides, when the 4 wheel gears are not engaged, then there is no room for differing fuel consumption .If at all it inherently comsume the fuel unexpectedly,then its better to visit a mechanic and ask him to adjust the consumption rate,by ncautionining him to rectify the injector pump screw,or service the pump it self.Of course there is,fact is when the four wheel gear is engaged,the vehicle aquires a high momentum force and as such,the front and rear diffs are in motion perpecuated by the propeller shaft.Despite the force applied on the vehicle in its locomotion,it necessitates high amount of fuel,as the motorist presses the accelerator cable impactly.Besides, when the 4 wheel gears are not engaged, then there is no room for differing fuel consumption .If at all it inherently comsume the fuel unexpectedly,then its better to visit a mechanic and ask him to adjust the consumption rate,by ncautionining him to rectify the injector pump screw,or service the pump it self.
The hourly fuel consumption of an ambulance can vary widely based on factors such as engine size, type of vehicle, and driving conditions. On average, a typical ambulance may consume between 8 to 15 gallons of fuel per hour. This consumption can increase during high-speed responses or when idling with lights and sirens activated. Additionally, newer models with more efficient engines may have lower fuel consumption compared to older ones.
Service it