we have a gas engine jenbacher 1006kw.we face a black shutdown due to exhaust back pressure high.
No gas in the engine
The engine is receiving more gas than it can consume. Sometimes the carburetor needle valve will vibrate to the open position or the float valve will stick open. Also, a fouled spark plug will not provide sufficient spark to ignite the fuel. Check out a lawn mowers and small engines repair manual from your public library for troubleshooting and repair procedures.
it doesnt
No
There are many potential hazards in the small gas engine shop. True or false?
My guess is it will causes the engine to surge and change engine speed up and down over and over because the ECU (computer) is searching for the right idle speed, but the bad sensor isn't sending the signal. It could also possibly cause the engine to just idle at a higher speed than normal.
One of the main causes of feeling a vibration in the gas pedal is engine vibration. The vibration from the engine causes the accelerator cable or linkage to vibrate and the vibration can be felt in the gas pedal. Check with a mechanic to be sure.
No gas.
An engine that consumes gas to provide more power. Or an old car.
Common causes are a loose gas cap or a cracked hose between the fuel tank and engine.Common causes are a loose gas cap or a cracked hose between the fuel tank and engine.
P0442 is a small leak in the evaporative emmisions system. It could be anything from a loose gas cap, a hole in a line, or a hole in the fuel tank.