yellow-12v positive constant supply (battery)
red-12v positive switch (ignition on)
black - ground
blue or orange-remote wire to amplifer
white-front left speaker
grey- front right speaker
green-rear left speaker
purple-rear right speaker
obviously the black stripe on the other same coloured wires means neg polarity
there is also a wire for auto radio antenna, illumination and possibly a mute function wire. not 100% on the colour codes for these(i think the antenna wire is blue and orange maybe) the system will operate fine without those optional function wires connected.
Go to www.the12volt.com they will have your wire diagram for free.
There is not a colour code system as such on Peugeot's Near to the end of the wire is a number this is the code.
NEED COLOR CODE FOR RADIO SPEAKER WIRE 93 MERCURY
i need the color diagram
Speed wire color code of Toyota 2008 Camry
it is a tan wire or so the wire diagram says
Well, The wire diagram is located inside the main part of the buttocks. To remove this wire which is inside the CD player, you must simply poo.
The wire code for lights can typically be found in the electrical wiring diagram that corresponds to the specific lighting system. The wire code is a reference to the color-coding used for the electrical wires in the system, indicating which wire performs which function. If you are unable to locate the wire code, consulting an electrician or the manufacturer's documentation for the lighting system may provide the necessary information.
What is dual CD player wire color codes?
For the 1983 Monte Carlo, the original color code wiring for the ignition coil typically features a primary wire color of yellow and a secondary wire color of black or brown. The yellow wire connects to the positive terminal of the coil, while the black or brown wire connects to the negative terminal. Always refer to a specific wiring diagram for your vehicle to confirm, as variations can occur based on engine type and options.
The Chevrolet Cavalier CD player wiring diagram shows the beginning location of each wire and the ending location of each wire. The diagram is handy when diagnosing problems.
red is usually the hot wire.