Yes, as long as it is a pre 87 350. In 87 Chevy changed the cylinder head configuration, and thus takes a different intake. The only isue here is the place you put the oil in. On early 283's, there was a hole in the front of the intake, to put a tube, to put opil in. There were no holes in the valve covers. Newer stuff, they eliminated that hole, and you put oil into the valve covers. Just make sure you have the proper set up. It does not matter where you put the oil, either spot, but, just so you can.
put the lifters up rite in a can of motor oil and let them sit for 30 mins
Is it ecotec or not? if not, the oil pressure switch is located 2 inches to the left of the oil filter on the back of the motor
well it depend on the size of the motor and the space for it.
put a ford motor in it
wat other motor can i put in my 2001 chevy blazer
Your best bet is to go to a auto recycler(junkyard) and get another dipstick. Otherwise, the only way to be sure you have the right amount in would be to drain it all out and put back in whatever that motor's oil capacity is.
5W/30 motor oil
I work at Chevy dealership and we put 5 quarts of motor oil on 3.8L engine... In fact i have 2002 Grand Prix GT.
Synthetic motor oil.
the weight of oil that is in the motor...10w-30 is more than enough, if the oil was changed and say 20w-50 oil was put in then your oil pressure is going to be higher...the oil is thicker or heavier
No