To fill the hydraulic oil in a Case 580K backhoe, locate the hydraulic reservoir, which is typically found near the rear of the machine. Use a high-quality hydraulic oil that meets the manufacturer's specifications, usually AW 32 or ISO 46 hydraulic fluid. Ensure the oil is clean and free of contaminants before filling, and check the dipstick to ensure the correct level after filling. Always refer to the operator's manual for specific oil recommendations and capacities.
It depends on the trans. If it is an earlier 580k then it has a wet brakek and will need specific fluid. Hytran ultra or Case transaxle fluid if newer then gear oil will suffice.
12 qts
where is oil cap
In the hydraulic oil tank. Where that's located depends on which model of backhoe you have.
The type of engine oil a Case backhoe takes typically depends on the specific model and its engine requirements. Generally, a multi-viscosity oil like SAE 15W-40 is commonly recommended for many Case backhoe models, particularly in warmer climates. It's always best to consult the operator's manual or manufacturer's specifications for the exact oil type and viscosity suitable for your specific backhoe model. Additionally, using oil that meets API (American Petroleum Institute) service classifications is advised.
hydraulic oil,AW-300
I have a 1986 Ford 550 backhoe and the transmission uses hydralic oil
what kind of oil does a automatic '99 hyundai elantra take?
Motor Oil
synthetic oil
Look on the valve cover.