900rpm, and 600 rpms, respectively.
If my memory is correct you need a distributor from a Chevy inline 6, a distributor drive gear from an AMC 360 V8, and plug wires from a Ford inline 6
Need to know the model in order to answer this.
Most likely, 355.
There is a detent cable that comes from the tranny. It connects to the bottom of the throttle linkage on the carb.
more than likely a 3.08 gear.
Most any stock carrier without a posi with have a 2:73 ratio
Need more info, manual steering gear box, power steering gear box, 3 speed standard transmission box, or 4 speed transmission box? The truck has a 3 speed manual transmission and power steering gear box thanks The steering gear box will interchange.
assuming you have a automatic its dextron 3 if standard its 80/90 gear oil
I have a 98 S10, 5 speed standard with 185K miles on it and I use Mercon in the transmission.
The dot on crankshaft at 12 o'clock and dot on cam gear at 6 o'clock the centerline of crankshaft, dots on gears, and centerline of camshaft should all be inline.
Inline skates are used in roller hockey.