I think this may be a homework question because I sell Refrigerant by weight, 24 pounds for a MCI Bus 1.2 Pounds for Chev Pickup
55 gallons and the weight will vary from 660 lbs to just under 700 lbs not including the weight of the barrel. Honey is sold by weight. One gallon will weigh a little over 12 lbs. The barrels are steel with a weight of 40 lbs. When you purchase a barrel, you will have the weight of the honey then a tare weight of 40 lbs. The total weight of the barrel will be over 700 lbs.
I have a '94 Vandura and the capcity is 3.0 lbs R134a refrigerant.
I just received a 350 turbo 6" tailshaft, Shipping weight was 130 lbs. That's with no fluid or converter.
1.57 lbs
1.52 lbs of r134a freon...
2.0 lbs R134a
I just received a 350 turbo 6" tailshaft, Shipping weight was 130 lbs. That's with no fluid or converter.
The weight of one gallon of R134a refrigerant, also known as norflurane, is 4.5713 kilograms. This is equal to 4,571.3 grams or 10 pounds 1.25 ounces.
Assume a small piston (one square inch area) applies a weight of 1 lbs. to a confined hydraulic fluid. That provides a pressure of 1 lbs. per square inch throughout the fluid. If another larger piston with an area of 10 square inches is in contact with the fluid, that piston will feel a force of 1 lbs/square inch x 10 square inches = 10 lbs. So we can apply 1 lbs. to the small piston and get 10 lbs.
Those two units of measure do not convert. One is weight or mass and the other is volume.
approx. 1.5-2.0 lbs. of R134a type refridgerant
Any car newer than 1994 uses R134a. Pre 1994 uses R12. I believe the Trailblazer uses 1.8 lbs of R134a