The reset ranch light with the oil can on a Chevy C 5500 is a warning to check the oil. It can also mean that the oil needs to be changed.
9.6 liters
Turn your key to on, not run, and depress the gas pedal five times slowly but within a few seconds. You should hear a chime, the change engine oil light will go off when u start the vehicle again if it doesn't go off when it chimes
how do you reset the check engine light on a 2005 Toyota tundra
How do you reset the message to service engine soon on 2005 Nissan terra
1.press mode button until oil life or change oil or change oil now is displayed2. Press and hold mode button for 5 seconds until reset for new oil is displayed3. Hold reset for 2 seconds
It tells you when to change the oil. Once you have changed the oil you can reset it by holding the reset button down.
the oil indicator light only comes on when the oil preesure is below normal operating levels, you should get with your dealer on that one.
how do you reset the oil light on a 2006 sts to 100%?
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
go to your Status button in the car and scroll to oil change option and hold the reset button down for 3 seconds. That simple!
I have a C4500 with a 6.6 Duramax and it takes 16qts. with the filter, also change your fuel filter with every oil change.