Wiki User
∙ 12y agomanual stick shift BMW what cause to shke when i change in to the first gear
Wiki User
∙ 12y agoThere are several things that can cause your manual transmission not to shift out of first gear or reverse. The most common cause is a broken shifting fork.
There are several things that can cause your 2005 Jeep manual transmission to shift hard between first and second gear. The most common cause is a malfunctioning shifting fork.
The tectonic plates shift causing them to collide and shake the ground.
Is it an automatic or manual if it's an automatic you may have a bad u joints and same for manual, as well as synchronizing gears may cause it to be hard to shift. Otherwise i'd say it's your u-joints
bad synchronizer
If I'm not mistaken, it appears that your truck is a "manual transmission"? There would be no indicator light - you shift into first gear, and then as you approve about 10 or 15 mph you would shift to second. I recommend the "learning manual transmission for dummies" - actually a very well written instruction book on learning how to shift.
Nothing, as the 2008 Challenger wasn't available with a manual shift.
try checking the fluid level or if you use a heavy trans oil try a lower weight. check pilot bearing
If you shift the gear stick to the right, it is on manual. Then by pushing it forward and releasing you shift up; by pulling backward and releasing you shift down.
A car with a manual or stick shift transmission.
Cable too slack.
Gear shift linkage?Remove gear shift from top and align