Most common problem and easiest to fix is a dirty mass air flow sensor. Go to an automotive parts store and locate a can of Mass air flow sensor cleaner (it will be in an aerosol can). Do NOT use carb cleaner, brake cleaner, or any other solvent, as this may damage the unit, and they are quite expensive. Locate your air intake. It should be a tube that goes from the inside of the fender, or front of the engine, to the top of the engine. Somewhere along the tube there will be some wires that protrude, with a hose clamp on each end. This is your mass air flow sensor. Remove the hose clamps to expose the sensor itself. Then follow the instructions on the can to clean. Installation is the reverse of removal.
Normal is 20-30 psi at idle. 40-60 at 3000 rpm. Minimum at idle is 10psiNormal is 20-30 psi at idle. 40-60 at 3000 rpm. Minimum at idle is 10psi
10psi is minimum. Normal would be 30 at idle, 60 at 3000 rpm.10psi is minimum. Normal would be 30 at idle, 60 at 3000 rpm.
it's the idle control valve, $60 part, or the computer.
Anything above 5 psi at idle will lubricate your engine. There is no maxim oil pressure for a 2003 Chevy Trailblazer. When the engine is cold and the oil is thick you should see 60 to 80 psi.
Jimmy Kimmel Live - 2003 2-60 was released on: USA: 30 October 2003
Jimmy Kimmel Live - 2003 1-60 was released on: USA: 15 April 2003
Probably 5 psi to 60 psi.
This old? 20-60 psi at idle
The Making of 'Interstate 60' - 2003 V is rated/received certificates of: Australia:PG
60 Minutes II - 1999 2003-12-17 was released on: USA: 17 December 2003
Minimum spec at a warm idle is about 12psi. Normal is about 30 at idle. Should go 40-60 at 3000 rpm.
40 on idle up to 60 while on the move.