answersLogoWhite

0

I don't know. I do know that the fastener that holds the blade on must be turned in the direction that the blade turns (when it's running) to take it off. Look to see which way the blade turns (you can tell by the cutting edges) and turn the fastener that direction to take it off. Think this through and you'll understand the applied physics behind this idea.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What does 2-16 inch thread mean?

If you are talking about a fastener, it is 2" diameter, 16 threads per inch. This is considered an extra fine thread fastener.


What is the champion spark plug cross reference for Briggs stratton rj19hx?

The Champion spark plug cross-reference for the Briggs & Stratton RJ19HX is typically the Champion RJ19LM. When replacing spark plugs, it's important to ensure that the specifications, such as thread size and heat range, match the requirements of your engine. Always consult the equipment manual or a reliable source for confirmation before making a replacement.


Is the hub nut reverse thread?

Is a hub nut reverse thread


Where on a fastener or screw do you test for thickness?

On the upper barrel, not including thread.


When a fastener is torqued to specification approximately how much of the twisting force is required to overcome thread friction?

Approximately 90% of the twisting force is required to overcome thread friction when a fastener is torqued to specification. The remaining 10% of the force is used to stretch the fastener and create clamp load.


Which pedal on a bike is reverse thread?

The left pedal on a bike is reverse thread.


What spark plug cross refernces for a Briggs and stratton 797235?

The Briggs and Stratton spark plug part number 797235 cross-references with several other spark plug numbers, including Champion RC12YC, Autolite 216, and NGK BPR6ES. When replacing, it's essential to match the heat range and thread size for optimal performance. Always consult your engine's manual for the correct specifications.


What information is required to determine the size of a fastener to be used?

To determine the size of a fastener to be used, you need to know the diameter, length, and thread pitch of the fastener. These measurements are typically specified in metric or standard units.


How do you call out a thread fastener in a technical drawing?

size threads per inch fit class


What plug can you cross reference for a Briggs and stratton spark plug 798615?

The Briggs and Stratton spark plug 798615 can be cross-referenced with several other compatible spark plugs, including Champion RJ19LM and NGK BPR4ES. When replacing, it's important to ensure the spark plug's specifications, such as thread size and heat range, match your engine's requirements. Always consult your engine's manual or a trusted source for the most accurate cross-reference information.


What is the difference between M8 x 1.25 6g and M8 x 1.25 6h?

Metric fastener size designation nomenclature. As fully explained in ISO 965-1, Sect. 5, metric fastener size designations always begin with capital M or MJ followed by fastener nominal diameter and thread pitch, both in units of millimeters (mm), separated by the symbol "x", as follows. M10 x 1.5-6g-S means metric fastener thread profile M, fastener nominal size (nominal major diameter) 10 mm, thread pitch 1.5 mm, external thread tolerance class 6g, and thread engagement length group S ("short"). If referring to internal thread tolerance, "g" would be capitalized. A fit between threaded parts is indicated by internal thread tolerance class followed by external thread tolerance class separated by a slash; e.g., M10 x 1.5-6H/6g.


Are axle nuts reverse thread?

No, axle nuts are typically not reverse thread. They are usually standard thread, meaning they are tightened by turning clockwise and loosened by turning counterclockwise.