the steering linkage
It is located on the steering linkage. Look under the vehicle at the steering linkage on the passeger's side. It is bolted to the passenger's frame rail and serves as a hinge point for the steering linkage.
There may be something wrong in steering linkage.
Worn or loose steering linkage or worm gear.
A steering damper is a shock absorber mounted between the axle and steering linkage. It lessens the amount of vibrations felt in the steering wheel.
No - they are part of the steering linkage.
same as it does on any other vehicle with a steering box - converts rotary motion from the steering wheel to linear motion for the rest of the linkage. Cars tend to use a 'steering rack' which fits a little further down the linkage but essentially does the same job
check out the linkage on the transmission sometimes the bolt can loosen up or the linkage cable in the steering colomn may need to be tightened.
Loose steering: You notice how steering wheel is very easy to move and feels sloppy. It creates an difficult feeling on the highway because it seems you have no control of your car.POSSIBLE CAUSES: - Steering linkage is worn and parts need to be restored.- Steering linkage may be loose and need to be tightened.- Your steering box needs adjusting.
Have someone rock the steering wheel back and forth as you inspect the steering linkage for loose joints.
an idler arm holds the right side of the steering linkage.its job is to mirror the movement of the pittman arm.the pittman arm holds the left side of the linkage(pittman arm is attached to the steering gear. i.e. when you turn the steering wheel,the steering gear turns the pittman arm,which moves the steering linkage,which turns the tires.) idler and pittman need to move together so tires move together. (for more info try searching "parallel steering linkage")
Locate the power steering gear box and drain the fluid. Locate the bolts and remove them. Pull the arm. Detach the steering wheel from the steering linkage. PullÊthe linkage until it dischargesÊfrom the gear box. Loosen the bolt on the gear box and remove the box.