Second or third cant remember which.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
To install an exterior door handle on a Cherokee Jeep, first remove the window crank handle and the three screws in the inner door trim panel. Second, remove the inner door panel from the door using a trim stick and take off the vapor barrier inside the door. Third, remove the nut on the rear of the door handle, position the exterior door handle, and secure in place.
A door is typically considered a third-class lever, where the effort is applied between the fulcrum (hinge) and the load (door itself).
Yes
second class lever
A door typically functions as a first-class lever, with the hinges acting as the fulcrum, the door handle as the effort, and the door itself as the load.
A door hinge is a second-class lever because the load (the weight of the door) is between the fulcrum (the hinge) and the effort (when you push or pull the door). This arrangement allows a small effort to generate a large force to move the door.
you grab the handle and PULL
try this site. http://www.jagsthatrun.com/Pages/Parts_S10-Third-Door-Handle.html
It is a third class lever machine because The effort is in between the load(food) and the fulcrum(handle)
log on to eBay and log in seller enigma326 he has complete installation instruction on the page that he is selling the handle.