Well, honey, if you want to renew your license plate tabs in Minnesota, you better hop on that computer and check out the official DMV website. They usually have online services available for stuff like that. But hey, don't blame me if you end up lost in a sea of confusing government websites – good luck!
Open your trunk the two inner bulbs are for your license plate twist and should pop right out
Because this bulb is mounted vertically, it can be tricky. The recommended method is to remove the license plate and open the trunk lid.
Open your trunk and find the wires that go to the bulb over the license plate. Twist the base to remove the light.
Open trunk, plate fits through a slot--just push up from the outside front of plate
Open up your trunk and look up above the license plate. It is held in by screws. undo the screws adn unit drops down.
The license plate lights are located just above the license plate. Open the tail gate part way to make removal easier (unless you enjoy squatting). Remove the Phillips screws and replace the affected bulb.
Lift the handle right above the license plate.
Try using the key... (the lock should be behind the license plate)
If it is equipped with the flipper glass the switch is above the license plate.
Open the trunk and look for all the bolts that hold the chrome bezel that surrounds the license plate Take off the licence plate and remove the bolts behind it. Once you have all the bolts out remove the bezel and you eill have access to the bulb
There are many online schools in which you can get an mri technician license. Nearly all schools that specialize in technology will have an online course for this. For example, Stanford and MIT both have online courses for this.
I have a 91 and to open it, you insert the key into the slot above the license plate area, turn, and push in firmly until you feel the trunk open.