0
What else can I help you with?
What type of obd system does a 1995 acura integra have?
The 1995 Acura Integra is OBD1. There is no connector if you are looking for one.
Does the windshield from an Acura Integra'96 fit an Acura Integra 1992?
no
Is a 1991 Acura Integra an obd0 or an obd1?
A 1991 Acura Integra is classified as OBD1 (On-Board Diagnostics version 1). This system was introduced in 1991 and continued until 1995 for most Honda and Acura models. OBD0 was used in earlier models, primarily from the late 1980s to 1990.
When was Acura Integra GS-R created?
Acura Integra GS-R was created in 1992.
What is the firing order for a 1992 Acura Integra LS?
The cylinder firing order for the 1992 Acura Integra is: 1-3-4-2
Does a 1992 Acura Integra have a wiper relay?
Yes, the 1992 Acura Integra has a wiper relay on it. The relay is located under the underhood relay box.
How much oil is in a 1992 Acura Integra?
4.5 quarts
Where is an OBD1 plug to trouble shoot a 93 Acura Integra?
The OBD1 plug for a 1993 Acura Integra is typically located under the dashboard, near the driver's side. You can find it near the steering column, often attached to the lower part of the dashboard. Look for a rectangular connector with multiple pins, usually covered by a plastic cover. This is where you can connect an OBD1 scanner or jumper wire to troubleshoot the vehicle.
Where is a fuse box diagram for a 1992 Acura Integra?
what slot do the left power set belt fuse go in the fuse box for 1992 acura integra Under the driver side dash
Where is the OBD1 port located on a 1992 Acura Legend?
obd not available until 1996
Where is the ecu in an 1992 Acura Integra?
should be under the passenger floor
Is a 95 integra obd1?
no, its obd2
