nut
nut
The ball hitch and coupler must be the same size.
The top of the trailer hitch ball should be aprox 18 to 20 inches off the ground.
The cleat hitch knot is primarily used to prevent the boat from floating away from the slip. It is merely a half-hitch, secured about the dock's cleat. It is the same knot used to secure the halyards (near the bottom of the mast), and the flag (near the bottom of the flagpole). Check out the (animated!) related link below for more information:
Yes, it should.
The top of the hitch ball should be aprox 19-20 inches from the ground.
false
Your hitch should have slots designated for the chains.
A torque wrench should not be used on any hitch type.
Make certain that the wiring is connected properly but also, check the ground wire. Don't count on the hitch to be the ground for the trailer. There should be a ground wire that goes to the electrical plug, make certain that it is connected properly.
That Is called A Pintle Hitch.
It all determines what type of truck that you have. Some trucks require a 1/2 hitch while others need a 3/4 hitch. Please ask the person you're going to buy the hitch from or a mechanic for which one is appropriate for you car.