it depends on the different types of waste
a mixture would probably be close to the flash point of the lowest "ingredient"
Depends on what exactly is in the waste.
what is a flashpoint <><><> The temperature at which a substance gives off an ignitable vapor is the flash point. If the flash point is under 100 degrees F, it is a flammable (gasoline). If it is over 100, it is a combustible (diesel fuel). Flash point is NOT the ignition temperature.
The minimum temperature at which a material gives off enough vapor to form an ignitable mixture with air is called the material's flash point. It is an important safety measure in handling and storing flammable substances.
I'm not sure how you arrived at this conclusion, but it's incorrect. The flash point is defined as " the lowest temperature at which it can vaporize to form an ignitable mixture in air" - this temperature remains the same regardless of location.
Poisonous, ignitable, or cancer causing waste is called hazardous waste. Other properties of hazardous wastes are that they may be corrosive or reactive.
It has a flash point of about -50° F (-65° C)(lowest temp ignitable). The ignition temperature is about 495° or autoignition which it can go off without external spark source.
The flash point is typically measured using a closed-cup or open-cup apparatus according to standard testing methods such as ASTM D93. The test involves heating the sample in a controlled manner while introducing a flame at regular intervals, and the temperature at which ignitable vapors are produced is recorded as the flash point.
The flash point is the lowest temperature at which a liquid can vaporize to form an ignitable mixture with air. Flammable liquids have a flash point below 100°F (37.8°C), while combustible liquids have a flash point at or above that temperature. This distinction is important for safety and regulatory purposes, as flammable liquids pose a higher risk of ignition. Understanding the flash point helps in handling, storing, and using these substances safely.
At room temperature carbon monoxide is a gas. It boils at around minus 191 deg C. By definition flash point is the lowest temperature a liquid material can vaporize to form an ignitable mixture in air. So probably the answer is the boiling point.
The flash point of a substance is the lowest temperature at which it can vaporize to form an ignitable mixture in air. A flash point of 54 degrees typically refers to a liquid that can ignite at this temperature, indicating it is flammable. However, it is important to know the specific substance being referred to, as different materials have varying flash points. Always refer to safety data sheets for detailed information about flammability and handling.
The flash point of a flammable liquid is the lowest temperature at which the liquid can vaporize to form an ignitable mixture with air. It is a critical property used to assess the fire hazard of the liquid; a lower flash point indicates a higher risk of ignition. Flash points can vary significantly among different substances and are determined through standardized testing methods. Understanding the flash point is essential for safe handling, storage, and transportation of flammable liquids.
Closed flash point refers to the minimum temperature at which a flammable liquid gives off sufficient vapor to form an ignitable mixture in the presence of an ignition source, under specific test conditions where the container is closed. It is an important safety parameter for handling and storing flammable liquids.