SERVICE YOUR CAR ENGINE!!!! SERVICE YOUR CAR ENGINE!!!!
The process of elimination works. If you have a check engine light, start there.
If the 2001 Mitsubishi Mirage won't start and has the service engine light on, you probably have an issue with a sensor. This could be a problem with an electrical or oxygen sensor.
turn off engine, and start again
The "Service Engine" light is the computer's way of telling you that it has something to tell you. Connect a scanner and see what it says.
To reset the "Service Engine Soon" light on a 1989 Buick Electra, first, disconnect the negative battery cable for about 15 minutes to clear the engine control module's memory. Reconnect the cable and start the engine to see if the light has turned off. Additionally, ensure that any underlying issues that triggered the light are addressed, as simply resetting it won't fix potential problems. If the light remains on, a diagnostic scan may be necessary to identify persistent issues.
I can, and so can anyone else who has a relatively new engine diagnostic code scanner. However, if the problem is not resolved, the light will return as soon as you start the engine
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
That is normal but, when you start the engine the light should go out.
Why my infiniti QX56 doesn't want to start, the service engine light is on? is it because i stayed without gas, or whats causing for it not to start. A tuneup has been done..
If the check engine light is on with no codes, you have a wiring or computer issue.
If you are referring to the Check Engine light then the bulb is either blown or has been blacked out on the dash by a crook.
To reset the service light on a 2009 Volvo S80 with a push start, first, turn the ignition to the "On" position without starting the engine. Press the "Trip" button on the instrument cluster until you see the "Service" message, then press and hold the "Trip" button for about 10 seconds until the message disappears. Finally, turn off the ignition and then start the engine to ensure the service light has been reset.