Yep.
The ABS wires may be unplugged from your rear brakes. On my 94, they plug in behind the rear wheels.
You need to find out what is tripping the ABS light (a mechanic with an ABS code reader) and then repair it.
check your abs plugs on the top of you master brake cylinder...i had the same problem on my 94 grand am and it turned out to be just a loose plug. check your abs plugs on the top of you master brake cylinder...i had the same problem on my 94 grand am and it turned out to be just a loose plug.
You have to fix the cause of the code that turned the light on. You will need a scanner to read the code.
An ABS code reader is a device to plug into an automobile computer. The vehicle computer will then diagnose problems and print the error codes on the screen if anything is wrong with the engine or other controls.
Plug in a diagnostic code reader that does ABS and get the codes. Your local auto parts store will do that for you at no cost.
There are several ABS trouble codes for a Chevrolet automobile. The most common ABS trouble code is; error code 628.
It could be as simple as a loose wire on one of the ABS wheel sensors, or it could be something as expensive as the ABS controler. You'll need to have a shop plug in an ABS code scanner to find out what's wrong. Unfortunately, there don't seem to be any code readers available to consumers that can read the ABS diagnostic codes.
ABS
eat lots of food and I mean lots of food like chocolate candy food junk food and then jog in the spot for 1 min for a month that is what I did an know I have a 8 pack abs and I have six girl freinds
You do not have to plug anything. You will have normal brakes even if the ABS does not work.
You have to repair the malfunction that caused the code stored in the abs computer.You have to repair the malfunction that caused the code stored in the abs computer.