0
Depending on the device you can usually find a new wiring harness. I recently changed my stove from a 3 prong to a 4 prong by simple unscrewing a couple of screws in the back and putting on a 4 prong wiring kit. Took me a toal of 10 minutes and I am by no means an electrical savant. Go to Home Depot and just a new wiring harness for under 20.00 dollars. Hope that helps.
What else can I help you with?
How do you covert a two prong welder plug to a three prong and ground out let?
Need to know the amperage rating of the plug or the NEMA configuration of the plug and receptacle
What does subtrating your page from 220 and then multiplying that number by 705 calculate?
155100
Is a switch an input or output device?
An input device. It is because it let the source to flow.
Is a limit switch an input or output device?
An input device. It is because it let the source to flow.
How do you catch a Crobat Pokemon pearl?
You have to let evolve from a Golbat by Level Up with Happiness Value at 220
How do you polarize a 6-volt generator on an international farmall tractor?
Hook a battery to it and let it spin for a few seconds.
How do you polarize a 6 volt generator on an international farmall tractor?
Hook a battery to it and let it spin for a few seconds.
Why do you call mouse to a computer device?
why do they let illiterate people speak
How to backfeed a generator safely and effectively?
To backfeed a generator safely and effectively, follow these steps: Make sure the generator is properly grounded and connected to a transfer switch. Turn off the main power supply to avoid backfeeding into the grid. Start the generator and let it run for a few minutes to stabilize. Connect the generator to the transfer switch using the appropriate cables. Turn on the transfer switch to start supplying power to your home or appliances. Monitor the generator and power usage to prevent overloading. When the main power is restored, switch off the generator and disconnect it from the transfer switch.
What do you do to go in Kanto radio tower?
You have to fix the powerplant generator, by catching the team rocket member with the missing piece. They will then let you in.
Three prong dryer that was converted from a 4 prong dryer you need to convert it back to a 4 prong?
The second ground prong grounds the frame and shell of the dryer. You can attach it anywhere on the frame if there is not a specific terminal for it, or just ignore it. The two hot and 1 ground should let it function. Do not ignore the green wire or grounding conductor. Remove the bonding jumper from the neutral terminal (grounded conductor, white wire) that bonds the neutral to the metal frame. The screw on the metal frame of the dryer the bond strap connects to is where you want to land the green wire. Save the bond strap you might have to convert it back to three wire in the future.
What is 60 divided by 220?
0.2727
