0
Add your answer:
Earn +20 pts
How tight do you tighten the bolts of the valve covers to a Chevy 350?
100 INCH pounds.
Can the push rods on a Chevy 350 prevent the motor starting if the rods are to tight?
Yes. If the valves (rocker arms/push rods) are adjusted too tight, the valves will hang open instead of closing. This will result in a loss of compression at the very least. It can also prevent the engine from pulling in air/fuel as well.
Why would a Yamaha raptor-motor turn over slow?
valves are adjusted to tight
Why after replacing 1984 Chevy 350 heads popping out of the tailpipes?
Valves adjusted to tight. Firing order mixed up.
What is the tightening order for Chevy intake?
to tighten a intake manifold start with a center bolt and tigten in a circular pattern towards the ends. tighten bolts in even incraments until tight.
What is wrong when the wiper blades do not work on a Chevy Corsica?
wiper motor or the bolts holding it tight.
What happens when small block Chevy rocker arm is set to tight?
The valves won't be able to fully close at higher rpm.
How do you tighten the belt on a 1999 Chevy v8?
if your belt is loose, the tensioner probably needs replacing. the tensioner is the mechanism that keeps the belt tight.
What is the oil filter torque on 2009 Chevy Malibu?
there is no torque on the oil filter!! when putting back on tighten the filter hand tight as much as you can.
What is the lug pattern of a 2002 Chevy Trailblazer?
Tighten every other lug hand tight then to 95-l05 Ft. Lbs. in 2 steps
What is the verb of tight?
It's 'tighten'
What is a synonym for stretch tight?
tighten
