Want this question answered?
You can replace the thermostat on your 2010 Chevy Impala 3.5 by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will come right out. Reverse the process to install the new thermostat.
how much labor time does it take to change the water pump on an 07 impala
A WATER PUMP ON A CHEVY IMPALA IS ABOUT $20-30 DOLLARS.The cost of installing it should be about 60-80 dollars,i have an 04 impala myself and i had to change mine they usually go bad at about 80,000 miles.
The 2006 Chevy Impala water pump can be found on the front of the engine. You can follow the top radiator hose directly to the water pump.
Remove the belt from your 2005 Chevy Impala water pump. Remove the water return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Replace water pump for an 1986 Chevy Nova?
The average cost to replace your 1997 Chevrolet Blazer water pump is $230. The water pump will cost approximately $80 and require two hours of labor.
The heater core can be found behind the passenger side kick plate. Remove the water supply hoses from your 1996 Chevy Impala heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
long
If there is coolant coming from it and it isn't a hose.
Where is the Water Pump located and how do you replace it on a 1990 Chevy Corsica?
The engine thermostat, on a 2008 Chevy Impala 3.5 V6, is located on the lower front side of the engine. The thermostat will have a water hose going into the top of it.