around 50 ton jack
1000 ton
In a 300 USRT chiller, "RT" stands for "Refrigeration Ton," a unit of measurement that quantifies the cooling capacity of the chiller. One USRT (U.S. Refrigeration Ton) is defined as the ability to remove heat at a rate of 12,000 BTUs per hour, which is equivalent to the cooling effect of melting one ton of ice in 24 hours. Therefore, a 300 USRT chiller can provide a cooling capacity of 3,600,000 BTUs per hour.
300 000 ton
A 1 ton truck will have the largest hauling capacity, but the half-ton truck will haul a lot and is easier on gas. The ton and half- ton refer to how much you can haul including passengers. The Dodge Ram has both the 1 ton and half-ton truck which would easily do the job.
It would take 1 ton of water to create 1 ton of steam.
Not much, it is a quarter ton truck.
Cooling capacity is typically measured in British Thermal Units per hour (BTU/hr) or in tons. One ton of cooling capacity is equivalent to the amount of heat required to melt one ton of ice in a 24-hour period. The higher the BTU/hr or tonnage, the greater the cooling capacity of the system.
The amount of rice husk required to produce 1 ton of steam can vary based on the efficiency of the boiler and the moisture content of the rice husk. Generally, it takes around 200 to 300 kilograms of rice husk to produce 1 ton of steam. However, precise requirements can differ based on specific operational conditions and technology used.
Actually the 5 ton designation is payload capacity i believe that the weight unloaded is around 15000lb
29$ p.s. you weigh a ton
Square metres are an area, a ton is a mass the units are incompatible.