Depending if the key has a chip or not. If it does not you can go to Home Depot or lowes and make one cheap for like 12 $ if it has a chip they cant make it and you have to go to the dealership and they will do it for you which can cost up to 70$ from what my friend told me when he made extra one for Lexus. Best way to tell if your key is just skinny and not oval shape probably doesnt have one and many of them have little opening on the side to be poped open thats how you know there is a chip inside.
Get you replacement Vauxhall Corsa key fob and many other makes from <a href="http://www.keyfurb.com/?s=vauxhall+corsa"> Keyfurb.com</a>.
Ignition switch 2002 Chrysler sebring. Original key will not turn? Is there a fuse or replace the switch?
If it is the ignition key, then you will be making a trip to the dealership, so that they can program a new key for you. That key should be chipped so a regular cut key will not work.
urgent reply
To much weight on your key ring.
This must be done at the dealership. I did not have a spare and lost my only key. Key had to be special ordered. The car towed to the dealership and programmed. $400.00 for new key and keyless remote.
use the key
You have to replace the key. Home depot sells (chip) transponder keys and programs them much cheaper than the dealers
For the central locking system on an Opel Corsa Lite, you typically need a CR2032 lithium battery for the key fob. To replace it, open the key fob casing carefully, remove the old battery, and insert the new one, ensuring the positive side is facing the correct direction. After replacing the battery, test the central locking function to ensure it works properly.
About £120 - £150
Yes it is. It is coded with a transponder.
To replace the barrel (ignition lock cylinder) on an Opel Corsa, start by disconnecting the battery to prevent any electrical issues. Remove the steering column covers to access the ignition assembly. Insert the key into the ignition, turn it to the "on" position, and press the release pin to remove the old barrel. Finally, insert the new barrel, ensuring it's aligned correctly, and reassemble the steering column and reconnect the battery.