The recommended tire pressure for a Case 580 backhoe typically ranges between 30 to 35 psi (pounds per square inch) for front tires and about 20 to 25 psi for rear tires, depending on the specific tire type and load conditions. It's essential to check the manufacturer's specifications for the exact model and tire type, as maintaining the correct pressure ensures optimal performance and safety. Always verify tire pressure when the tires are cold for the most accurate reading.
7 ton
12 qts
The Case backhoe was introduced in the year 1842 in the United States. The fuel consumption for a 580 Case backhoe is one gallon for every twenty horsepower.
A backhoe excavator is one that has a loading bucket on the front and a hoe on the back. Such as a Case 580 backhoe
A Case 580 backhoe loader weighs around 15,000 to 17,000 pounds, depending on the specific model and configuration.
n6c410800
hydraulic oil,AW-300
The brake fluid reservoir, on a 580 super E backhoe, can be found in the engine compartment near the end closest to the passenger compartment. The reservoir should be labeled for brake fluid.
To change the brakes on a Case 580 backhoe, first ensure the machine is on a level surface and securely supported. Remove the wheel and tire to access the brake assembly, then detach the brake drum and any retaining hardware. Replace the old brake pads or shoes with new ones, reassemble the brake components, and ensure everything is properly aligned and tightened before reinstalling the wheel. Finally, test the brakes to ensure proper function before operating the backhoe.
my 86 580 super e uses one gallon an hour if im running hard.
What year is serial number JAB0139091
Shipping weight of 60s 580 CK Backhoes are approximateley 4990kg depending on whether it has cab or not. Subtract approximately 100kg for cab.