it has 3.5
ADVERTISED HORSEPOWER IS--155HP @ 4400 RPMs.
stock around 180hp with the 2 barrel and a little less with th 4 barrel
A stock 1984 Chevrolet 350 small block V8 engine has 160 horsepower. The output can be increased by installing a free flowing exhaust system, high performance cam, or electronic fuel injection.
what ae you asking?? crossifre injection was used on later model engines with TBI
This means that it is a 305 from a 86-95 Chevrolet car or truck. These engines were one of the first form of V8 Fuel injection that Chevy produced. It was called TBI or throttle body injection.
95cc arent worth it 140 HP@ 3800 RPM's with a 2-barrel carb.
The 1967 Chevrolet 327 cubic inch V8 engine with a 4-barrel carburetor typically produces around 275 horsepower. This engine was part of the small-block family and was known for its balance of performance and reliability. Depending on the specific configuration and options, horsepower ratings could vary slightly, but 275 is the common figure for the 4-barrel version during that model year.
the 327 Chevy was buiit with anywhere from 210 hp with a 2 bbl carb to 375hp with fuel injection and everywhere in between.
150 horsepower
460 horsepower
200 hp not much... don. unless its a corvette. and even then...... not much.
It depends upon the aspiration. The dual carb setup, (the fullhouse) made about 285. The F.I. model, was closer to 290. Single 4 barrel, about 260. and with a 2 barrel, I think around 225.