The cost to replace a temperature door actuator typically ranges from $100 to $400, depending on the vehicle make and model, as well as labor rates in your area. Parts alone may cost between $30 and $150, with the remainder attributed to labor. It's advisable to get a quote from a trusted mechanic for a more accurate estimate.
Close to $100.00 but it all depends on who you go too.
Remove the inside door panel. Remove the linkage from the actuator. Remove the retaining nut from the actuator. Reverse the process to install the new actuator.
It almost $500
To change the door lock actuator in a 2008 Buick LaCrosse, start by removing the door panel. This typically involves unscrewing bolts and gently prying off clips. Once the panel is off, disconnect the electrical connector from the old actuator, unbolt it, and replace it with the new actuator. Finally, reassemble the door panel and ensure everything is secure before testing the new actuator.
To change the door lock actuator on a 2000 GS300, start by removing the door panel. This typically involves unscrewing screws and carefully prying off clips to avoid damage. Once the panel is off, disconnect the wiring harness and remove the bolts securing the actuator. Replace the old actuator with the new one, reconnect everything, and reassemble the door panel.
I believe you are looking for blend door actuator???
remove door panel unscrew actuator pull wire out replace new part
I was told by a chevy service manager that it would cost in the neighborhood of $300.
Where is the blend door actuator located on a 2005 malibu
The lock actuator is in the rear door, the panel will need to be removed. When the panel is removed you will see the actuator bolted to the door frame. Not to hard to replace.
Where is the blend door actuator on a 1998 Sonoma
It depends on the year and wether you have digital or manual air