answersLogoWhite

0

4 wires are needed.

  1. positive battery cable
  2. negative battery cable
  3. power wire to starter solenoid (momentary switch)
  4. ignition power wire (on/off switch)
User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What would make a Chevy small block sound like popcorn when you start it?

Sounds like an exhaust leak.


Did Chevy Make A big block 327?

No. The 327, is a small block.


If sidestand and clutch relay wires on 1994 virago are disconnected-do they have to be connected for bike to start?

no they do not. wires do not make bikes start


What can the problem be if a fuse blows everytime after starting a 1999 Chrysler Concord?

first make sure your battery's positive is disconnected to avoid being shocked. If possible take the whole fuse block down and look at the wires coming into the fuse block and make sure no bare wires are touching each other or metal on the car. from their find out where the wires go and trace them down. you have to have a short somewhere. look at all wires that travel next to your engine block and make sure no plastic has melted or wires melted and touching each other or metal.


Is the Chevy v8 350 a small block or big block?

"The v8 350 is a small block Chevrolet motor.....................it became a big block at 396cubic inches......so anything smaller is a "small" block" this is a little misleading. a 350 is indeed a small block. a 396 is indeed a big block. but you can have a small block that is (internally..cubic inch wise) actually larger than a big block. for example GM made a 400 cubic inch small block. internally it is a larger engine than a 396, but the outer dimensions of the 396 are larger than the 400 small block. and the external dimensions and cylinder head design are what make a small block a small block, and a big block a big block. a small block engine simply has a physically smaller block...a big block is called a big block because it's block is bigger than that of a small block.


How do you replace the alternator on a 1970 GMC K1500 truck 350 small block?

first what i do is take pictures of the wires and the bracket then u take off the wires from the back of the alternator make sure u know where they go then take off the 2 bolts holding on the alternator.


How to connect 3 wires to 2 wires effectively and safely?

To connect 3 wires to 2 wires effectively and safely, you can use a wire nut or a terminal block. Strip the insulation off the ends of the wires, twist them together, and secure them with the wire nut or terminal block. Make sure the connection is tight and insulated to prevent any electrical hazards.


Why does the motor die when going over a bump on a 1968 Pontiac 350 motor?

start checking all your ignition wires for being loose, check the small wires that come off of the battery terminals to make sure they are tight on both ends, my friend had the same problem and it was one of those small wires that was loose where it connected on the radiator support in back of the headlight.


Did Chevrolet make a 350 big block?

No, they did not. The smallest big block Chevy is the 396. They also made a small block and big block 400.


How much horsepower does A 397 small block make?

it depends


How to make a solar power at home?

take a solar panel & add wires on the panel & connect these wires to the small appliance!!!!


How do you tell 350 big block from small block?

They dont make a 350 big block.The big block starts at 400. Wrong! 400 is still a smallblock. Big block Chevys start at 396, but does not include the 400, which the heads/crank and starter/etc. fit on the 350/305 etc.