It depends on the supply voltage watts = current in amps times the supply voltage
The conversion factor of 1 BTU = 0.293 watts. So, 60,000 * 0.293 watts = 17,580 watts. 17580 watts are required to run a craftsman 60,000 btu propane forced air heater.
That would depend on it`s size or input rating. You can get the input rating off the unit nameplate and divide that # by 2500 and that will tell you how many cubic feet of propane vapor the furnace burns per hour. If you buy propane by the gallon ask your supplier how many cubic feet of vapor a gallon of liquid propane yields and you can figure your answer.
The wattage required to run a geothermal furnace can vary depending on its size and efficiency. On average, a geothermal furnace typically consumes around 500-1500 watts when running. It's best to check the manufacturer's specifications for the specific model you have.
Electric furnaces are rated in Kilowatts. The following formula will let you figure it out. Watts = amps x volts. For eg. a 10 Kw furnace draws 10000 watts. amps = watts/volts. 10000/240 = 41.6 amps. If your furnace differs from this example, just plug in your wattage and you will have your answer.
Propane furnaces are available from plumbing and heating retailers. Many local businesses that offer home repair also have physical stores with home appliances such as heaters and toilets for sale.
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
The power needed to run a furnace can vary depending on the size and type of the furnace. However, a typical residential furnace may require anywhere from 500 to 5000 watts to operate. It's best to consult the manufacturer's specifications or a professional to determine the exact wattage requirement for your specific furnace.
the older furnaces would draw 700 watts plus depending on the size of the blower. the newer furnaces with variable speed blowers can draw as little as 100 watts
I have never heard of a way to do this without changing the whole furnace. Propane furnaces are usually thin steal walled heat exchangers with many burners. Oil Furnaces have a large burner chamber and then a small heat exchanger above it. If there is a way, you will need to change the heat exchanger and all electrical components. It may be cheaper in the end to just change the whole furnace.
A typical oil-fired furnace consumes about 120 to 300 watts while running. However, the actual wattage can vary depending on the furnace's size and efficiency. It's important to note that the initial ignition process may require a higher wattage for a short period, often around 500 to 800 watts. Overall, the average operational consumption remains relatively low compared to electric heating systems.
12