That will vary greatly among different engine designs. Some V12's displace over 24 Liters others are small as 4 Liters (relatively small haha).
If you are changing your coolant then make sure the bottom radiator hose is attached and fill the engine block with a 50/50 mix of antifreeze and water through the thermostat housing (thermostat removed of course) reinstall the thermostat, connect the upper radiator hose and fill the radiator with the 50/50 mix. Close the radiator cap and run the engine for 5 mins, shut her down and refill the radiator. Job done!
-CJP
12.5 lt
about 4.5 Liters
What year, and what engine?
Engine Oil Capacity, with WIX 51393 Oil filter....4.5 liters
According to the ( 1997 ) Ford Expedition Owner Guide : Both the 4.6 liter engine and the 5.4 liter engine take : ( 5.7 liters of engine oil with engine oil filter change )
The engine coolant system capacity is : for the 4.0 liter V6 - with air conditioning - (8.6 quarts / 8.1 liters ) for the 5.0 liter V8 ( 13.5 quarts / 12.8 liters )
About 5.5 liters.
With engine oil filter change : for the 3.8 liter V6 engine ( 5 quarts / 4.7 liters ) for the 4.6 liter V8 engine ( 6 quarts / 5.7 liters )
AnswerThe drain cock is located on the bottom of the radiatior on the drivers side. That drains the whole coolant system. Take the cap off the radiator reservoir which is the radiator cap by the way. That allows the water to drain out pretty easily.
With engine oil filter change ( 4.7 liters of engine oil ) for the 4.0 liter SOHC , V6 engine in a 2002 Ford Explorer Sport Trac
8.25 Litres with filter change too.
3.3lt will take 9.5 liters 3.3lt will take 9.5 liters