There are many gaskets on any car engine. If you are asking about head gaskets, they are between the cylinder head(s) and the engine block. The cylinder head is under the valve cover. --------------
Four cylinder has one. Six cylinder has two.
The Ford Taurus for the most part has a V6 engine. It has 2 head gaskets. Some very early model Taurus's had 4 cylinder engines which had 1 head gasket.
There are ( 2 head gaskets ) one head gasket for each head on your V6 engine
They have two.
A 2005 Chrysler Town and Country 3.8L has two head gaskets.
There are two head gaskets in the V 8 1999 mercury mountaineer
It sounds like coolant is getting in your oil. Recheck you intake manifold gasket.Hopefully the head gasket sealed up. Did you have the heads surfaced? Did you pressure test heads for leaks? When head gaskets go the heat can crack/warp cylinder heads.Mark. Also, make sure you buy original Rover gaskets, as many after market gaskets arn't up to the job. Rick.
worn rings , low compression , cylinder bore taper, cracked pistons , cracked cylinder heads between head gaskets, could be many things causing oil to many things breather
There are two head gaskets,one for each head.
4 cylinder engine 4qts V6 engine with filter change 4qts Inline 6cylinder engine 6qts
probably 10.