answersLogoWhite

0


Best Answer

Starter draw is typically under 100amps. The battery has to be in good enough shape to take the 150 amp (fuel injection, pump, and ignition) draw plus not allow a voltage drop below 10 volts. Coils don't really fire well at lower voltages if at all.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many amps are required to start a 5.7L engine?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many amps are required to start an engine?

The amount of amps required to start an engine varies depending on the size and type of the engine. As a general guide, small engines may require around 50-100 amps to start, while larger engines like those in trucks or heavy equipment may require several hundred amps. It's best to refer to the specific manufacturer's recommendations for the engine in question.


How many amps does it take to start a SUV?

usually around 600 amps, but it depends on the engine you have. For example, a larger engine will require more amps than a smaller engine. a typical 5.0 L V8 requires about 650 amps, and some SUVs have larger and smaller engines. So check your engine,and get the right battery.


How many liters diesel is required to start a train engine?

150 Ltr.........


How many amps are needed to start a V 8 engine?

There isn't one set answer for this. It'll have to do with the displacement of the engine, the output of the starter required to get it to crank at enough speed to start, etc. Huge difference between, say, a 4.6 liter Land Rover V8 and a 12.0 liter Detroit Diesel 8V92 diesel V8.


How many amps do you need to start a pocket bike?

7 pocket amps


How many amps do you need from a portable jump starter to boost an engine?

That depends on several factors: If the car battery is FULLY discharged, a starter can pull as much as 200 AMPS when you try to start the engine, depending on the size of the engine. If the car battery is only "low", but still carries a pretty good charge, you might be able to get by with considerably less than 200 AMPS.


How many cold cranking amps to start your 1993 Taurus at 0 degrees?

Almost any auto battery will start the engine if it is runnging good. But I would buy at least a 500cca battery.


How many amps are required for 100W light bulb operate on 110 volts?

amps equals watts divided by volts.


How many volts does a battery need to start a engine?

a battery should be reading 12 or 13 volts at full charge you would need it over 10 volts but its hypothetical as it depends on the engine size10 To add it's not the voltage that turns the starter motor it is the amount of what is called cranking amps or cold cranking amps cca which refers to the amount of amps when 32 degrees Fahrenheit or up. If you have below the specific amount of amps for your starter it will click, turn but very sold, or do nothing. A 12 volt battery typically needs 400+ amps to start the car. While 5 volts means your battery is dead having 12 volts does not mean your car will start.


How many amps altenater in 1997 dodge ram van?

3.9L / 5.2L engine - Denso Alternator Part No: 53008646 rated at 81 amps 3.9L / 5.2L / 5.9 L engine - Denso Alternator Part No:53008647 rated at 117 amps 3.9L / 5.2L / 5.9 L engine - Denso Alternator Part No:53008651 rated at 136 amps


How many amps are required to operate a garage door opener?

A 15 amp circut will be fine.


On a 305 v8 gmc engine how many amps dose the alternator produce?

It depends on the alternator.A diesel produces more amps because of the 24 volt system.14 amps on a 305....