No you cannot house amps use 120 volt ac car amps use 12 volt dc
The power used by Pioneer brand car stereos is variable depending on the specific model of stereo. For example, Pioneer stereos use as little as 5 amps and as much as 12.
The THD Hot Plate is a power attenuator for a car stereo system. You can use the THD Hot Plate to keep a power source to your amps. The Hot Plate is used by serious car stereo enthusiasts.
It depends on the capacity of the battery and the power used by the stereo. To roughly calculate the time, divide the amount of charge in the battery (amps hours) by the amount of current (amps) used by the stereo. If you don't know the current, divide the power of the stereo (watts) by 12. That would give you the current at max power output (max volume).
To charge a car battery you need aproximatly 8000 amps To charge a car battery you need aproximatly 8000 amps
"US Amps" car stereo audio amplifiers can be purchased online from Amazon, and other retailers. Its products are also available directly under the brand name "RE Audio", as well as "US Amps", from the reaudio website.
The Direct Car Audio website offers products and services related to car audio such as Speakers, Amps and Stereo Systems. You can learn more about these products at the Direct Car Audio website.
For men, subwoofers command an entire block of listeners, therefore making them an important part of any car stereo system. To know what to look for, go to a local car stereo service and ask for something that will sound adequate.
Wrong question. I assume that this pertains to a car and not a house. All modern cars run on a 12-volt system. So what I think you meant to ask is "how many AMPS in 90 watts at 12 volts?". Watts divided by volts equals amps, so 90 watts divided by 12 volts equals 7.5 amps. If you are trying to wire in a car stereo amp, better go with a 10 amp fuse.
There are many features of an average Boss car stereo. The main features of an average Boss car stereo would be the good quality surround sound that the system provides.
In Car Stereo was created in 1983.
P.CONT is a turn-on lead wire for your external amps if you have them. All it does is sends a signal to your amp (if you have one) to turn on/turn off