0
12 hours before you add the coolant and 24 before you drive
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you replace water pump on a 1987 Mazda B2200?
DRAIN AND REMOVE RADIATOR.SHROUD AND FAN REMOVE WATER PUMP,RE-INSTALL PUMP WITH SILICONE SEALENT..GOOD LUCK ..toro2
How do you change a water pump on a 1992 dodge Dakota 5.2L?
Take off your belt. Take off the fan. take off water hoses on pump. Unscrew all bolts on water pump. There are many. Put new pump in the same spot . Put silicone sealer on all of the connecting metal of the new pump. Place the new pump on and bolt it back up again. Wait a while for the silicone to set and dry.
How long should a water pump last on a 2005 Chevy Trailblazer?
i don't know how long a water pump should last, but mine just went out on my 2005 TB at 47,000 miles. ugh.
How do you Change a Car water pump?
for my 99 camaro, i had to find it first, then i took the belt off, then i took the bolts off and got a razor, and scraped the old water pump gasket off the water pump, then i put silicone gasket maker on my water gasket and put that on the water pump that is attatched to your engine, then i put silicone gasket maker on the new water pump and then i stuck that on the other half of the water pump and bolted it back on, lol i figuered it out by myself and im 16 and that is the first time i worked on my car, hoped that helped
What else needs to be changed when you change a water pump on a 1995 Nissan maxima?
As long as you are taking it all apart, you should replace the radiator hoses, heater hoses, and accessory drive belt(s.) Be sure to get the gasket for the pump, and some hi-temp (red or blue) silicone to seal it up.
How long should it take to replace a water pump in a 1997 cavalier?
45minutes
How do you replace the water pump on a 1991 Nissan 240SX?
i cant fully answer this question but first you should purchase a repair manual. i know when relacing a water pump you must first disconect the negative connection from the battery, release the pressure and drain the coolant. next you must remove the radiator ,coolant fan and any other things that inhibit the removal of the water pump. remember to purchase the new water pump with a new gasket included. and you will need silicone to seal the water pump when replacing. that's basic hope it helps
Can 100 percent silicone be used on a water pump gasket?
Sure. 100% silicone can be used. The sealant is not necessary as the gasket does the sealing anyway. the sealant does help hold the gasket in place for easier installation.
Do you need sealant or Silicone with the gasket when changing the water pump in a 1994 Chevy Astro Van - 4.3L?
its a very good idea
How often should you replace the water pump on a boat?
How often should you change water pump in a boat
Is a 350sbc water pump and a 400sbc water pump the same?
Yes it is, as long as the 350 pump is not a late model pump.
Does a 1994 Chevy 350 have a long or short shaft water pump?
That would be a long shaft water pump.
